Skip to content Skip to navigation menu
Type:
HM060S005

Dimensions

Critical speed n over stroke length axis LST

Deflection w over unsupported axis length LAW under payload

Dimensions
Lc Total carriage length 220 mm
B Switch position 35 mm
C Switch position 98 mm
E End position at mechanical zero 50 mm
F End position at mechanical zero 25 mm
LT Total length LT = LST + 325 mm
Load data
Fydynmax Ultimate force 2896 N
Fzdynmax Ultimate force 3628 N
Mxdynmax Maximum torque 28 Nm
Mydynmax Maximum torque 240 Nm
Mzdynmax Maximum torque 191 Nm
z Upper carriage edge to guiding centre 57,4 mm
General technical data
vmax Max. speed 0,25 m/s
amax Max. acceleration 15 m/s²
Fx_max Max. feed force 2541 N
Ma_max Max. drive torque 2,29 Nm
Load capacity 25 kg
Maximum total length 3286 mm
Repeatability ± 0.02 mm
Ix Area moment of inertia of profile cross-section 431907 mm⁴
Iy Area moment of inertia of profile cross-section 539706 mm⁴
Guiding
Guiding type QEH15CA
Cdyn Dynamic load rating 12530 N
C0 Static load rating 15280 N
Drive
Shaft nominal diameter 15 mm
Lead 5 mm
Axial play 0,02 mm
Cdyn Dynamic load rating 13800 N
C0 Static load rating 23800 N
Mechanical properties
Carriage mass 1,05 kg
Mass at 0 stroke 3,31 kg
Mass per 1 m stroke 5,88 kg/m
Jrot. Mass inertia moment at 0 stroke 0,19 kgcm²
Jrot. Mass inertia moment per 1 m of stroke 0,39 kgcm²
Idle torque at 0 stroke 0,27 Nm
Carriage
HIWIN spindle axes are available with two different carriage lengths depending on the size and dimensions of the load to be transported. In order to ensure ideal, reproducible alignment of the adjacent structure, each threaded hole has an additional bore hole via which the load capacity can be fixed with centring sleeves. The matching centring sleeves can be found in the accessories.

Motor connection and belt drive
The multi-part design of the motor/gearbox adaptation creates an extremely flexible drive interface for attachment and conversion of the drive technology. Optionally, the motor attachment can be rotated by 180° via a belt drive, which significantly reduces the total length. You can configure the suitable drive adaptation for your axis here.

Cover strip
The steel cover strip prevents dirt and dust from entering the axis interior. In addition, the cover strip allows the axes to be used in areas with coarse, sharp-edged or hot foreign bodies. The magnetic strips integrated in the axis profile hold the belt securely in position and increase the sealing effect.

Spindle support
In applications with long travel distances and high velocity, the critical speed of the shaft is quickly reached, meaning an appropriate support is required to prevent the shaft from swinging up. In HIWIN spindle drive axes, up to three travelling shaft supports can be installed on each side of the carriage. This allows driving at full speed, even with large strokes.

Lubrication
For convenient maintenance of the linear axis, a separate grease nipple is fitted to the left and right of the carriage for each lubrication point. This ensures optimum accessibility for relubrication, even under difficult installation conditions. For further information on lubrication and maintenance, please refer to the assembly instructions.

Spindle lead
The integrated HIWIN ballscrews ensure precise positioning thanks to their high pitch accuracy and rigidity. Different shaft pitches are available for each size in order to optimally meet the requirements for feed force and dynamics.
Spindle lead

Name Article number Description  
Anschlagpuffer zylindrisch Ø10x10, M4x6 25-000056 Anschlagpuffer  
Name Article number Description  
Adapter set CPN HM060 – KK40 25-001626 Adapter für Mehrachs-System  
Adapter set CPN HM060 – KK50 25-001627 Adapter für Mehrachs-System  
Adapter set CPN HT150 – HM060 25-001610 Adapter für Mehrachs-System  
Adapter set CPN HT200 – HM060 25-001611 Adapter für Mehrachs-System  
Adapter set CPN 2×HM060 – HM040 25-001595 Adapter für Mehrachs-System  
Adapter set CPN 2×HM060 – HM060 25-001596 Adapter für Mehrachs-System  
Adapter set CPR HT150 – HM060 25-001570 Adapter für Mehrachs-System  
Adapter set CPR HT200 – HM060 25-001571 Adapter für Mehrachs-System  
Adapter set CPR 2×HM060 – HM060 25-001562 Adapter für Mehrachs-System  
Adapter set CPR 2×HM060 – HT150 25-001565 Adapter für Mehrachs-System  
Adapter set CCN HM060 – KK40 25-001638 Adapter für Mehrachs-System  
Adapter set CCN HM060 – KK50 25-001639 Adapter für Mehrachs-System  
Adapter set CCN HT150 – HM/HC060 25-001584 Adapter für Mehrachs-System  
Adapter set CCN HT200 – HM/HC060 25-001585 Adapter für Mehrachs-System  
Name Article number Description  
Magnetleiste HM060/080/120/HT100 L=7,5m 25-000543 Magnetleiste  
Name Article number Description  
Limit switch, 4 m cable (NC) 25-000787 Endschalter  
Name Article number Description  
Clamping prof.short HM/HT size 6(4 pcs.) 25-000518 Spannprofil  
T nut HM/HT size 6 M5 pu 10 pcs. 20-000530 Nutenstein  
T nut HM/HT size 6 M6 pu 10 pcs. 20-000531 Nutenstein  
Centring sleeve 8h6 pu 10 pcs. 25-000511 Zentrierhülse  
Groove cover HM/HT size 6 L=2m pu 5 pcs. 25-000515 Nutabdeckung  
Name Article number Description  
Gear ring size 14 for HM060S/HT100S 25-000203 Zahnkranz  
Name Article number Description  
Strip deflection Set HM060B/S 25-000619 Bandumlenkung  
Name Article number Description  
Coupling housing for HM060S 25-000306 Kupplungsgehäuse  
Name Article number Description  
Set Bedämpfungselement HM 25-000785 Bedämpfungselement  
Name Category Product Size Language
Linear axes and axis systems HX Catalogue Linear axes & linear axis systems 13 MB
Linear axes HM, HT, HB, HD Project planning sheet Linear axes & linear axis systems 285 KB
Spindle axes HM-S, HT-S Assembly Instructions Linear axes & linear axis systems 4 MB
Go to download centre
HIWIN HX: One axis family – countless possibilities
An innovative design, two designs, three drive types and countless possibilities. The bendable HIWIN HX axis system offers the right solution for your ideas.
Installation of the limit switches and adjustment of the switching distance for HIWIN linear axes
The limit switches or additional reference switches are quick and easily to install in HIWIN linear axes, and positioning is continuously variable. The switching distance to the damping element can be set easily using a feeler gauge. We’ll show you how in this video. Tools/Equipment recommendation: - 6-edged offset screwdriver set, feeler gauge, scale, assembly instructions.

Cover strip change in a linear module HM-B
The cover strip can be changed quickly and easily in the HIWIN HM linear modules. We’ll show you how in this video. Tools/equipment recommendation: 6-edged offset screwdriver set, cut-resistant gloves, permanent marker, bracket, tin snips, lint-free cloth, assembly instructions.